How to replace Engine Mount?

How to replace Engine Mount? Here are the materials you may need.

1.Socket and wrench set

2.Breaker bar

3.Long pry bar head screwdriver

4.gloves

5.Penetrating spray lubricant

6.Floor jack

7.various sizes of socket extensions

To replace the engine mount, you need to jack up the car from the ground and support it with a jack bracket. Remove the bolts on the tire and remove the tire, or open the plastic cover. Locate the faulty engine mount.

When disassembling the engine mount, a jack is needed to support the engine to help support the engine and reduce the weight of the bracket. It will be good to use some pieces of wooden to avoid damage to the engine.

After removing all obstacles, use a socket or wrench to remove the frame to install the bolts.

Finally, remove the main fixing bolts on the engine fixing frame and place your hands on the fixing frame because it will become loose.

After removing all the mounting bolts, grasp the mounting base and pull it out from the engine and frame bracket. Check the disassemble the old mount, you will see obvious wear or cracks.

We suggest that you should choose a new engine mount with good quality to replace. The original or high-quality engine mount will bring more comfort to driving and increase the service life. For OEM suspension engine mount, welcome to contact GJ Bush factory.